POLARIS Laboratories, LLC - Oil & Gas Industry
Oil Analysis, Well Test Analysis, Natural Gas Compressor Performance Analysis
OIL AND GAS Downtime is the oil and gas industry's number one enemy. In an environment where equipment is expected to run 24 hours a day, 7 days a week under extreme conditions, downtime caused by equipment failure can quickly put a company out of business. Oil analysis can predict equipment failure before it happens and eliminate downtime - saving you time and money…it costs so little to protect so much.
Oil Analysis can not only detect equipment failures in progress but point you
straight to the root cause of a problem as well, enabling you to prevent catastrophic
failures and costly losses in production. No matter what the application - on
or off-shore drilling, field services or oil & gas production - if equipment is
down, it's costing you money. Highly contaminated operating environments, extreme
operating conditions and the economics of equipment replacement only increase
the value of oil analysis as a necessary part of managing asset reliability.
TESTING
PROGRAMS
ENGINES
Diesel and natural gas engine oils should be tested routinely for contamination
and wear.

POLARIS
Test Packages Download the Oil
and Gas Product Guide here DIESEL ENGINES 
NATURAL GAS ENGINES

COMPRESSORS
-
| Replacement
units/parts may be difficult to obtain. |
-
| Valuable time and money are lost in downtime. |
-
| Particle
Count can aid in predicting component failure. |
-
| Susceptibility to corrosion requires natural gas
compressors be tested for Total
Acid Number and Oxidation / Nitration. |

HYDRAULIC
SYSTEMS
-
| Particle
Count can detect potential wear-causing dirt and contaminants early enough
to take action. | -
|
Biggest concern is water contamination, which accelerates acid formation, increases
oxidation and reduces lubricity - all lead to system failure. |
-
| Water
by Karl Fischer provides a precise measurement of how much water is present. |
PUMPS
AND GEAR SYSTEMS
-
| Direct
Read Ferrography provides a ratio of large to small ferrous particles. |
-
| DR reports a quantitative value
that indicates amount of ferrous wear occurring - provides tremendously helpful
trending information. | -
|
The oil's viscosity determines test package. |
|